


“We swear by your Creasing Devices, we have them on all our kit and wouldn’t buy anything else”
– Ian Drew
Printed Easy
“It has increased productivity but it’s more about the quality of the finished product. I definitely would put your product forward to other printing houses.”
– Johnathan Ellis
Hot Metal Press
“So far we are really happy with the product.
It has produced a really good crease from the start, with quick changeover from job to job… Simple and fast.
It has really decreased our production times on funeral orders of service that we produce, and as you can imagine, these are always last minute!”
– Steve Willis



Geoff Neal Litho
“I have been using your Tri-creaser devices for the last 18 years on both folding machines and cover feeders of stitching lines and have always found them first class, more importantly the service, sales and technical back-up that Tech-ni-Fold offer is of the highest calibre, and above all consistent.”
– Andy Murgatroyd
Printing.pl
“Tech-ni-Fold tools greatly contributed to the increase in the efficiency of the post-press department processes, in many cases they allowed for the elimination of intermediate processes that increased the cost of order execution. It should be remembered that the greatest advantage of purchasing Tech-ni-fold tools is the undeniable aesthetics of the final product, both in the case of creasing the printing sheets and performing trimming or micro-perforation. These aspects are possible thanks to the high precision of manufacture and durability of the tools.”
– Eryk Mirosław Woźniak

Lynhurst Press Ltd
“Customer service and products are both excellent and Tech-ni-Fold are always willing to go the extra mile!”
– Steve Samuels

Taskforce
“We have always found that any Tech-ni-Fold product does what they claim to do, stop our cracking.”
– Alex Porteous

Peter Scott Printers
“We have used Tech-ni-Fold products for over 12yrs and are very happy with the results we get from the Tri-Creasers.
The sales/ service team are helpful and efficient when we ring up for replacement products.
We have had no issues and are happy to recommend your product’’
– Tom Gaughan


All Trade Printers
“Excellent Product (best thing since sliced bread in my humble opinion)
Always excellent back up, keep up the good work!”
– Terry Mukadam



Denny Bros Ltd
“Really useful tool on small folder which enabled us to greatly improve folding accuracy & production efficiency on small Bi-fold booklet, thank you Tech-ni-Fold.”
– Tony Humphrey

Bluestar Print Finishers
“Here at Bluestar, we use the Tech-ni-Fold systems on all of our machines including our Muller martini, which has the Spine Creaser integrated into our cover feeder. The face of print finishing has changed beyond all recognition, no more so than in the area of inline creasing & perforating. Gone are the days of having to do two processes, now it’s all inline – one process. We would not be without the incredible solutions provided by Tech-ni-Fold. We produce lots of voucher books and 4pp’s, 6pp’s & 8pp’s up to 350 gsm all inline, saving our customers time and money. Well done to Tech-ni-Fold for developing and bringing to market one of the best series of solutions ever to have happened in the world of print finishing.”
– Lee Harvey
Infinity Finishing Partnership
“Tech-ni-Fold possess a high level of expertise that’s invaluable and unique in our industry. With cover stock variants always increasing we still manage to get great creases on our covers, their creasing devices never fails to enhance the quality of our finished products.”
– Ian Simkins



FCS Lasermail
“I have always found your team to be extremely responsive and willing to assist with advice and support, this is a rare quality in today’s busy print environment.”
– Michael Fay
Neuhaus SA
“Creasing is so perfect using your Tri-Creasers, we only do in-line creasing and folding on our Heidelberg Stahl folders, off-line creasing is something of the past!”
– Miguel Lowe
Temple Printing (Nottingham) Ltd
“We have the Tech-ni-Fold Tri-Creasers on our folding machines, and rely on them.
They work very well and make the difference between rough looking folds with cracking on the outside, and neat folds (with no cracking)”
– Neal Smith



Imprimerie Rivaton & Cie
“Your Tri-creaser allows our company to achieve impeccable quality; this means that our customers are very satisfied. In addition, we have saved time and money in being able to crease and fold in one pass. The operators are very satisfied with the robustness of your product and I am grateful of the speed with which you process my orders. We get the creasing consumables from you in England faster than if we could get them in France.”
– Patrice Tauzy

Imagery
“We are very pleased with the results, having taken our cylinder out a few years ago creasing became outwork for us, the device allows us to bring the work back in house and be competitive on cost while supplying the customer with a quality finish.”
– Richard Siviter
Abulhoul Printing Press LLC
“We found your first Tri-Creaser product very useful as it served the purpose of a good creasing channel. However, we faced some disadvantage to change the creasing inserts when worn out due to the need to remove the shafts of the folding machine. This was creating some downtime and difficulty to the operator.
Things changed overnight thanks to the introduction of the new flexible split creasing ribs on the Fast Fit version, which does not warrant any removal of shafts and can be fixed in only a few seconds. What a great idea and such a time saving feature that also provides a good creasing line especially on those difficult varnished stocks. The Tri-Creaser Fast Fit is a great tool for high quality folding formats and we strongly recommend this product for such jobs.”
– Narayanan Venkatesh




Paper Graph
“Fast Fit Gripper Crease: a very simple and fast solution, for a top quality result!
Easy to set up, decreasing our production time.”
– Kali Bourdi

Kingfisher Print & Design
“It is no problem at all for myself and Kingfisher Print to give yourself, your company, Lee White and most importantly the products themselves a big thumbs up from us all here.
To give an insight we have a Heidelberg ST Stitchmaster, Heidelberg KH82 folder and a H&H card folder all of which utilise the Tech-ni-fold scoring systems.
As we deal with customers in the high end of the property trade advertising houses in the millions of pound range our brochures have to be of the highest quality with zero cracking.
Only the Tech-ni-fold Spine Creaser system Crease Stream and Tri Creaser systems along with the fast fit technology are able to meet and surpass our needs on a multitude of paper types.
I would not hesitate it demonstrating and or recommending the advantages of these priceless products and the finish that they alone create.”
– Jonathan Carkett

Hemlock Printers
“I would recommend Tech ni Fold to any finishing company. Their products give you the option to score and perf or trim jobs efficiently and accurately. The scoring options produce a much better looking product then conventional scores and also gives you the option to score and fold inline giving you the ability to keep more work in house.”
– Paul Roberts




Pepper Communications Ltd
“We have used the Tech-ni-Fold Tri-Creaser in-line on our folders for a number of years, it is a very quick system to make ready and the results are equal to a cylinder crease. Because we can crease in-line we are able to achieve speeds of up to 30k sheets per hour on our Heidelberg Stahl folders eliminating all cracking across a multitude of paper types and gsm.
Outwork creasing is eliminated with the in-line Tech-ni-Fold Tri-Creaser, perfect crack free creasing results across a wide range of paper stocks and gsm.”
– Jake Whitford

Manchester Print Finishers
“We have been using Tech-ni-Fold’s Tri-Creaser’s since we opened 14 years ago and have always found their products and services, first class.”
– Gerry Landers
Bayliss Printing Co. Ltd
“The Creaser Kit for our Heidelberg StitchMaster Cover Feeder paid for itself in less than 1 month. To date it has saved us thousands of pounds in offline creasing…”
– Arran Cooper




Revival
“Since fitting our Tech-ni-Fold cutting tool we have been delighted with consistent quality trimming of booklets as they come out of the folding machine. The other great thing is that we don’t need to change the blades very often. In fact this type of job caused us major headaches for a number of years – now that the cutting tool has been fitted the issue of trimming is a non issue.”
– Samuel Adams
Wyatt & Wilson
“Our new Tri-creaser has proved very quickly, that to produce a top quality job, it helps if you have the best tools and the Tri-creaser is the best yet. Easy to set-up and quick to adjust, the time saved in Letterpress creasing alone will see the Tri-Creaser pay for itself in the first six months. The machine operators are finding that any cracking problem is quickly overcome and as such the only problem I have is getting them to share the device. We are also finding a major benefit is the ability to avoid cracking on centre spreads with the wrong grain direction.”
– Hank Roelink
Quebecor
“I want to express to your company, how well you’re Tri-Creaser has worked for Quebecor World. We have a customer that requires virtually perfect non cracking spines on a saddle stitched book, using coated 10 pt cover. Prior to using your scoring device, we were offline scoring on a sheet fed press and still could not achieve perfection. We nearly lost this customer due to this issue. Then we tried your device and it solved the problem immediately. Since the beginning, this device has worked flawlessly, so well that we have purchased additional units in some of our other divisions.”
– Pete Magrino



Mohrdieck Tryk A/S
“We have now used our Tech-ni-Fold Spine Creaser for a Horizon 5500 for a couple of months with great success. We really improved our quality and optimised our production, saving a lot of time. Therefore I can highly recommend this product.”
– Hans Mohrdieck
Platinum Print Ltd
“Having recently investigated the upgrade of our existing inline creasing system we tested a number of alternatives. The help, assistance and flexible approach from Tech-ni-Fold allowed us to be 100% sure the product would accommodate our exacting needs.”
– Mark Plummer
FM Print, Basingstoke
“What a change the Tri-Creaser Fast Fit has made to our business already. The quality of the crease is excellent and it will be a great cost saving for our business. The installation and training was very professional and thorough, and we are looking forward to utilising the device to its full potential, whilst keeping control of our own creasing work.”
– Glenn Felton



Inprint
“We purchased Tri-Creaser a year ago & have great success with them. They are simple to set up; anyone can do it (even an inexperienced operator) & produce outstanding results as good or better than a cylinder. The 8 different crease settings make them versatile with and against the grain on coated stocks.”
– Gil Davidian
Datagras
“Tech-ni-Fold!!! Amazing that something that simple and user friendly wasn’t brought to the market years ago! We have already earned the investment back (two months after the purchase.) We have an easier and faster workflow in our house, the transportation time and costs for creasing by other companies are reduced significant, and we have a constant contact with the job here in our house. A perfect solution!”
– Christian Nielsen
Prinfo Trekroner A/S Denmark
“We bought the Complete Multi-Tool Combo Package for a specific trimming job with high demands, which cost us some serious problems before. By implementing Tech-ni-Fold equipment we solved this in a perfect manner. Also the creasings have proven to be perfectly sharp, and we don’t see any crackings in the folds anymore.”
– Ole Nielson


Streamline Press
“The difference is phenomenal, it affects everything from cost, to efficiency, to getting the job done quicker and keeping the customer happy.”
– Dominic Corcoran
Rainbow Print Wales
“It’s easy to fit, easy to use and the quality of the crease is superior to any other creaser I’ve found.”
– Darren Roberts