Goebel IMS DOC 150

Inspection rewinderIn current production

The Goebel IMS DOC 150 is an inspection rewinder. It runs at up to 1,000 m/min. Working width is 1,400 mm.

Each job you run comes with its own specific problems, and more often than not the culprit is found on the tooling shafts. The standard finishing tools supplied with your machine aren’t accurate, versatile or delicate enough for the results you and your customers expect. At Technifold we design and build bespoke, retro-fit premium finishing tools to solve both common and complex finishing problems.

Your DOC 150, finished properly.

Patented in the UK · 45,000+ tools running in 79 countries · since 1999

The DOC 150 at a glance

Max speed: 1,000 m/min
Working width: 140 cm

Built for: The Goebel IMS DOC 150 is an inspection rewinder. It runs at up to 1,000 m/min. Working width is 1,400 mm.

What we solve

Problems we eliminate on the DOC 150

Machine-direction creasingCrease down the web at full press speed. No offline pass, no rotary die registration risk, no slowing the line for finishing.See how we eliminate it →

Micro-perforation on the webTear-off work perforated down the web, flat enough to keep processing and clean enough to tear by hand. Ten pitches, inline, no speed loss.See how we eliminate it →

Every finish, one cassetteCrease, score, perforate, cut and kiss-cut in any combination across the web. One retro-fitted cassette, reconfigured per job.See how we eliminate it →

Custom & OEM toolingA part that is obsolete, impossible to source, or never existed. If it is a wheel, a blade, a rib or a holder that touches paper or board, we can probably make it.See how we eliminate it →

Tooling for the DOC 150

If it’s a wheel, a blade or a rib that touches paper or board, we can make it.

Tech-ni-Fold manufactures precision finishing tooling: 45,000+ tools running in 79 countries over 25 years. Alongside our patented systems, we engineer and machine components to order for finishing machinery of every kind, including machines like the DOC 150.

Precision rotary tooling is what we do

Creasing ribs, scoring wheels, perforating blades, slitting knives, blade holders, anvils and custom shaft components, designed and machined in-house in the UK, by the company that invented and patented rotary creasing.

Engineered to order

Most of what we make started as somebody's problem, not a catalogue page. Send us the part, the drawing, or just the job that's going wrong, and our engineers will tell you straight whether we can make it better, sharper or cheaper.

OEMs buy from us already

Machine manufacturers source blades, holders and finishing components from us under their own part numbers. If you build or maintain machines, you get a supplier who actually understands why the part is shaped the way it is.

Talk to the engineers

What does your DOC 150 need?

Tell us the part, the problem, or the price you’re paying now. We’ll tell you honestly what we can make, what it would cost, and how quickly it can be on your machine.

Ask about your machine →[email protected]