Machines/Kolbus · Boxline
Kolbus BLF 500
Boxline box formerIn current production
Each job you run comes with its own specific problems, and more often than not the culprit is found on the tooling shafts. The standard finishing tools supplied with your machine aren’t accurate, versatile or delicate enough for the results you and your customers expect. At Technifold we design and build bespoke, retro-fit premium finishing tools to solve both common and complex finishing problems.
Your BLF 500, finished properly.
Patented in the UK · 45,000+ tools running in 79 countries · since 1999
The BLF 500 at a glance
- Rated output
- 2,400 boxes/h
- Format range
- box bottom (external) 65×65 – 570×360 mm; height 20–170 mm; board 1.5–4 mm
- Max product thickness
- 4 mm
What we solve
Problems we eliminate on the BLF 500
Machine-direction creasingCrease down the web at full press speed. No offline pass, no rotary die registration risk, no slowing the line for finishing.See how we eliminate it →
Micro-perforation on the webTear-off work perforated down the web, flat enough to keep processing and clean enough to tear by hand. Ten pitches, inline, no speed loss.See how we eliminate it →
Every finish, one cassetteCrease, score, perforate, cut and kiss-cut in any combination across the web. One retro-fitted cassette, reconfigured per job.See how we eliminate it →
Custom & OEM toolingA part that is obsolete, impossible to source, or never existed. If it is a wheel, a blade, a rib or a holder that touches paper or board, we can probably make it.See how we eliminate it →