Prakash Offset Printing with Numbering and Perforating Machine

Sheet FedIn current production

The Prakash Offset Printing with Numbering and Perforating Machine is a sheet fed. It runs sheets from 180 × 260 mm up to 622 × 451 mm. It handles stock from 30 to 300 gsm, at up to 8,000 cycles/h.

Each job you run comes with its own specific problems, and more often than not the culprit is found on the tooling shafts. The standard finishing tools supplied with your machine aren’t accurate, versatile or delicate enough for the results you and your customers expect. At Technifold we design and build bespoke, retro-fit premium finishing tools to solve both common and complex finishing problems.

Your Offset Printing with Numbering and Perforating Machine, finished properly.

Patented in the UK · 45,000+ tools running in 79 countries · since 1999

Prakash Offset Printing with Numbering and Perforating Machine — manufacturer photograph

What we solve

Problems we eliminate on the Offset Printing with Numbering and Perforating Machine

Rotary creasing on your shaftsIf your machine has tooling shafts, we can put proper creasing on them: crack-free, colour-coded profiles, chosen per job, at full running speed.See how we eliminate it →

Rotary micro-perf on your shaftsTear-offs, coupons and reply forms, perforated inline. Ten blade pitches from coarse tear to a line that looks printed, on the shafts you already have.See how we eliminate it →

Rotary cutting on your shaftsSlits, edge trims, cut-outs and kiss cuts, inline. A true scissor shear against a hardened boss, on the shafts you already have.See how we eliminate it →

Custom & OEM toolingA part that is obsolete, impossible to source, or never existed. If it is a wheel, a blade, a rib or a holder that touches paper or board, we can probably make it.See how we eliminate it →